Can You Ceruse Any Wood?


Cerusing (sometimes called a “limed finish”) is a technique designed draw out the detail and character of the grain in a piece of wood. … Modern cerusing techniques use liming wax or paint to accentuate the wood grain, usually on a piece with a dark stain.

What is a Ceruse finish?

What is a Cerused Wood Finish? Cerusing, or liming, is a wood finishing technique that creates a two-toned look, where the open grain of the wood is accentuated against a contrasting base color.

Can you use liming wax over stain?

When your stain has dried completely, scoop out a bit of the liming wax onto a soft cloth and rub it into the wood in the direction of the grain. The liming wax is soft and easy to manipulate.

Does liming wax protect wood?

Applied to exterior wood, lime wax offers some protection against the weather and is believed to discourage attack from wood-boring insects.

Can you use liming wax without sanding?

If you want a truly quick makeover, you can skip the sanding portion and just apply the liming wax right onto the other finish. It will lighten up the stain and look beautiful that way as well.

Can you Ceruse birch?

This is one tough finish. It’s a great solution for cabinets or furniture that have some wear and tear. An subtle texture creates an appealing finish you want to touch.

Can you Poly over liming wax?

Limed wax can act as a top coat, or you can coat it with a clear wax such as Briwax Original (available on Amazon; $19.49) to lend a more durable finish to wood surfaces in high-traffic areas. But don’t top liming wax with polyurethane or polyacrylic sealants, as the wax doesn’t bond well to these products.

Can you Ceruse walnut?

Ceruse Natural on Walnut. Adding the technique known as “Ceruse” refers to applying a white fill material to a natural door, and then wiping it off on the open and varied grain of Walnut, creating a cabinet finish with an aged look that is on-trend for today’s design schemes.

Do you have to seal Liming wax?

You can use Briwax to seal it although i typically use lacquer, but your should seal it with something. I mostly use this lime wax for Cerused finishes on cabinets and furniture. It’s pretty easy, rub on rub off kind of stuff.

What is liming wax made of?

You don’t need to bring out any paints – all you need is White Chalk Paint® Wax, a Wax Brush and a lint-free cloth. Essentially, liming wax is a white wax that soaks right down into the grain of the wood. This technique has been called liming of even ‘pickling’ and would have been used on the old oak beams in houses.


How do you glaze wood?

Apply the glaze liberally with a brush, making sure it gets into all recesses, then wipe some off with a rag. Use a dry, soft bristle brush to spread the glaze evenly over the surface. The brush will both move glaze around and pick up excess glaze from puddles in corners.

What is Cerused White Oak?

Adding the technique known as “Ceruse” refers to applying a white fill material to a natural door, and then wiping it off on the open grain of Oak, creating a cabinet finish with an aged look that is on-trend for today’s design schemes.

Can you put polyurethane over waxed chalk paint?

Yes, you can use polyurethane over chalk paint. Poly is very durable, inexpensive and watertight. However, it can be tricky to get a smooth finish and it can yellow over time.

What happens if you dont wax chalk paint?

You have to also be careful to apply wax very evenly. What happens if you don’t wax chalk paint evenly is that built-up of too much wax can attract dirt. But a thin layer of wax could allow water to penetrate so be sure to use coasters on pieces that get a lot of use.

How do you make a high gloss finish with chalk paint?

If you paint with chalk paint, you need to apply wax or another finish after the paint dries. For a modern finish, I do not use clear wax. Waxing is a multi-step process, applying the wax and then later buffing the wax. It provides a quality result and durable finish, but the sheen is matte.

What does white wax do?

White Wax is essentially a clear wax that has been tinted white. It’s a mixture of both beeswax and carnauba wax, giving it a super soft and creamy consistency. … White Wax is perfect for creating a faded, washed or limed look on a piece of furniture. You can apply it over top of paint or directly on raw wood.

Can I use Liming wax on Pine?

Liberon Liming Wax is a white wax that is used to create a limed effect on oak and other hardwoods. It can also be used on softwoods, such as pine. It is easy to use and quick-drying.

Can you add color to liming wax?

Liming wax is white, but it can be dyed using powdered pigment. Some sort of dye is often used, but it’s not necessary to color the wood.

Can I use Liming wax on Maple?

To create a whitewashed look that lets the wood tone and grain show through: Apply liming wax to bare or stained wood, even those with sealed surfaces. Some woods such as beech, maple and rubber will benefit from opening the grain with a wire brush first.