Every turntable can play 33 and 45 RPM records. Only those classified as “three speed” support 78 RPM. These old records have wider grooves, so you may need to replace your stylus to play them. … You can get apps to test the performance of your turntable.
What happens if you play a 45 record at 33?
No Extra Damage
“Playing records on the wrong speed is mind-bending but will do no damage to your vinyl. “, Stated Steven, “Lots of 12” releases are on 45 RPM and 7” EP’s on 33 is fairly common. … Most of us know that our records will degrade gradually over time by use.
Does playing a record damage it?
As for wear-induced noise, most of that comes from playing records with a worn-out or damaged stylus (aka needle) that’s literally gouging the grooves with each play. Any decent cartridge will play records without damaging the groove. … A force setting that’s too high or too low can accelerate record wear and noise.
What is better 33 or 45 RPM?
33 RPM will generally lead to more playtime fitting on a record side. Going with 45 RPM will generally lead to playtime and low production costs being sacrificed for more audio quality. This is due to the fact that a higher speed allows the recording to fit more sound information in each second.
What is the most common vinyl size?
The most common sizes are seven, 10, and 12 inches in diameter, but size isn’t the only way to identify what kind of vinyl record you have.
…
Vinyl Record Formats
- 78 RPM Records History: …
- 331⁄3 RPM: …
- 45 RPM:
What is a 7 record?
7 inch records (also called “45s”) are referred to by their playback speed of 45 rpm and their standard diameter of 7 inches. At 45 rpm they hold around 4-6 minutes per side.
What are the 3 sizes of records?
Vinyl record sizes differ based on how much music is stored on the surface of the disk. Records come in three standard sizes: 7-inch, 10-inch, and 12-inch.
Do all record players play 12-inch?
All record players do not play every single size of vinyl record. All record players will play the two most common sizes of vinyl record, those being 12-inch and 7-inch, but it is far less likely they will be able to play a 10-inch record.
What’s the difference between a record player and a vinyl player?
A turntable needs a separate preamp, amplifier and separate speakers to play records. … A record player is an all-in-one device that does not need any external components to play records. In a record player, the turntable, preamp, amplifier, and speakers are all bundled into one unit. And it is often portable.
How many plays before a record wears out?
Under 20 plays is probably undetectable. Over 200 is probably significant in loss of high frequencies, say in the 10-20KHz range. If there’s mistracking in any way, or stylus wear, this gets worse fast.
What is the difference between 33 45 and 78 records?
33 RPM records are the largest in size, usually measuring 12 inches in diameter. 78 RPM records are usually 10 inches in diameter.
Why do records play at 33 rpm?
rpm spread across the oceans in the late 1940s as people wanted longer playing time than 78 rpm records could offer. In the 33 ? rpm records, the grooves were 2 thousandth of an inch and the smaller radius of the newly introduced cartridges allowed a full frequency recording at 33 rpm.
How long is a 7 inch record?
7″ Records (often referred to as 45’s) can be cut at 45 RPM or 33 1/3 RPM. When cut at 33 1/3 you can hold approximately 6:00 minutes per side. When cut at 45 you can hold approximately 4:30 minutes per side. These numbers are not set in stone, just a suggested maximum.
How much does it cost to press a 12 inch vinyl?
Vinyl Pressing
run of 12″ LP’s with colour jacket, seems to range around $2,300 – $2,600 depending on weight, shipping rates, etc. A similar run of 100 pieces will float between $1,200 – $1,600.
What is a half speed master?
What exactly is half-speed mastering? It’s a vinyl cutting process whereby the disc-cutting lathe for an LP is run at half the speed – so for an album that would be 16 and two thirds, which is half of 33 and a third – and the master source is run at half the speed as well.
What is a 33 vinyl record?
Speed and Diameter
Vinyl records come in three speeds: 33 1/3 rpm (often just called a “33”), 45 rpm and 78 rpm. The “rpm” is an abbreviation for “revolutions per minute” — an indication of how fast the record is meant to spin on the turntable.
What is a 12 inch mix?
The term “twelve-inch” usually refers to a vinyl single with one or more extended mixes or remixes of a song. … Many CD singles contain a number of such songs, in a manner similar to the older EP vinyl format.
Do 45 records sound better than 33?
Since 45s travel faster than 33s, more waveform definition can be squeezed into the format, which takes up more room. More bumps and grooves created in pressing a 45 means better audio quality.
Is 45rpm higher quality?
According to audiophiles, the 45 RPM format sounds better because more musical data is fit into a smaller space than with 33 RPM records. … In theory, it all sounds well and good. It makes sense that a 45 RPM record sounds better than a 33 RPM record.
Why do 45s have a bigger hole?
RCA decided to make the hole on its new 45 1.5 inches wide for a couple of reasons. First, RCA wanted its new format to crush the LPs being issued by Columbia and its licensed partners. Someone in the company came up with the idea of making and selling turntables designed exclusively for 45s.